Sketch cannot compile on Nano Every

[jon-nielsen]

Hello

Thanks for the project!

Unfortunately I have a compatibility bug to report.

The sketch cannot compile using the IDE with an Arduino Nano Every board.

The error is in the readpad.S file. "Error: Constant value required" on several lines of code.

If this cannot be fixed I suggest updating readme with a note.

Cheers

[SukkoPera]

I don't know anything about the Nano Every, sorry. I hope someone else will contribute a fix.

[jon-nielsen]

I may try with an Uno instead. Thank you.

[SukkoPera]

I'd recommend a $3 Nano clone from Aliexpress.

[L10N37]

Is this mod simply replacing switches and toggling language / screen refresh rates betwen high/low
Or is it also outputting a sub carrier clock?

I thought to check if anything existed prior to making my own, as i am sick of ugly switches and so forth when i have a draw full of MCU's. Also, i want to fix the sub carrier to ensure colour output on both modes over composite

[SukkoPera]

Only replacing switches. I think someone made a board which also includes a clock generator controlled by this project but can't say more than that.

[L10N37]

you can get the colour burst straight off the MCU without another Clock gen board ...I know you could with 32mhz. It's been a while since I checked docs. I may fork the repo in future to suit LGT8F328P (32Mhz) and set a fixed clock out so the board has the added functionality of the QXO-1100 or similar , all in one.

only I can't get the megadrive working I planned on using for the project. Paid way too much for it but I usually get the faulties working pretty easily. This one likely has a dead component and needs more analysis and a proper probing. If I get around to It, it will happen :P