Free cabinet design, material planning, nesting, and 3D.
CabinetDrafter is a free, offline-first browser cabinet planner for frameless and face-frame cabinet construction. It combines cabinet layout, drawer/open-space sizing, material takeoff, sheet nesting, an interactive 3D preview, and optional SketchUp export in a single HTML file.
No account, web service, or installation is required for the core app. Open index.html in a modern desktop browser.
Current version: 1.7.0.
CabinetDrafter includes a mobile-friendly Shop mode for checking off parts at the bench. It can filter the current cut list by cabinet or material, search for a part mark, show only unfinished work, and download the remaining cut list without changing the project design.
Cut-sheet labels use short marks plus explicit assembly roles such as Cabinet side, Cabinet bottom, Drawer 1 side, and Drawer 1 bottom. Visible applied drawer pieces are labeled Drawer face; drawer-box front/back parts remain distinct. Dimensions are printed vertically with practical fractions and unit-aware labels.
The Design tab includes 1:1 printable pull templates directly below the pull settings for drawer-face top notches and left/right-hinge door notches. Rounded notches use width, entry height, and corner radius. Circular chord/segment notches use circle diameter and segment depth; the tool calculates the chord width. Print at Actual size and verify the included one-inch scale square before transferring the shape. It can also download an STL router-bushing jig for the drawer-face top notch. Enter the actual bit diameter, guide-bushing outside diameter and thickness, and printed-jig thickness; import the STL at 100% scale and verify the first print against scrap.
- Frameless, face-frame overlay, and face-frame inset cabinets on a per-cabinet basis
- Drawer cabinets, single-door cabinets, mixed drawer/open-cubby cabinets, and open-shelf cabinets, with reorder controls for the run
- Explicit drawer heights and clear shelf/cubby opening heights
- Inches or millimeters for entry/display while keeping canonical geometry stable internally
- Applied backs behind open spaces and single-door cabinets
- Optional simple finger notches at drawer-front tops and centered on single-door pull edges, with rounded or circular chord/segment geometry and per-door hinge side
- Downloadable STL router-bushing jig with bushing-offset opening, clamp wings, top locating tabs, and center reference
- Role-based plywood material defaults, plus per-cabinet species overrides for box/carcass parts and faces/fronts
- Drawer-box sizing with configurable slide clearance
- Drawer-box joinery options: butt joints, 1/4 x 1/4 rabbets, box/finger joints, and half-blind dovetails
- Drawer-bottom options: between-wall biscuit fastening, floating bottoms in grooves, or captured bottoms in rabbets
- Drawer joinery inherits project defaults, with cabinet-level overrides and individual drawer overrides when a cabinet needs mixed construction
- Auto-sized drawer fronts keep matching bottom-up drawer stacks aligned across adjacent cabinets
- Plywood BOM, detailed cut list, grain-aware black-and-white sheet nesting, kerf, edge trim, and spare-sheet allowance
- Per-species sheet layout strategy: Auto, crosscut-first, or rip-first; Auto compares both practical strip directions
- Optional dedicated face sheets keep all drawer fronts and doors together by material, separate from carcass and drawer-box parts
- Optional cabinet-face grouping keeps each cabinet instance's doors and drawer fronts together on its own face-sheet group when the sheet size allows, while allowing non-face parts to fill unused space
- Face-sheet strategy can force side-by-side crosscut-first placement, and grain preservation can be limited to doors and drawer fronts so hidden Cherry parts use offcuts efficiently
- Sheet diagrams identify each part by cabinet instance, part role, and dimensions
- Cut-sheet parts also show a short pencil mark such as
2 A: cabinet number plus a per-piece letter, with the detailed label retained below - Build progress tracking by cabinet/drawer assembly or physical plywood part, with remaining-work nesting and selective layout printing
- Sheet diagrams have clickable physical-part checkboxes; optionally keep completed pieces on the diagrams with checked cut indicators
- Full-sheet inventory by material with a shopping list of additional sheets still to buy
- Separate face-frame solid-stock takeoff by thickness and member width
- Interactive browser 3D preview with orbit/zoom/pan, hidden-line print style, and PNG export
- Responsive tabbed workspace for design, preview, export, materials/cuts, progress, and construction reference
- Project JSON save/load with browser autosave
- Optional SketchUp Desktop Ruby export, with a choice to replace or keep previous generated groups
When GitHub Pages is enabled for this repository, the live app will be available at:
https://andyseubert.github.io/cabinet-drafter/
You can also download the repository and open index.html directly. The app does not require a server or internet connection once downloaded.
- Open
index.html. - Choose inches or millimeters.
- Add, edit, or reorder cabinets in the cabinet table.
- For each cabinet choose Frameless, Face frame - overlay, or Face frame - inset, and override box/carcass or face/front material if needed.
- Review the 3D preview directly below the cabinet table and adjust export/label options if needed.
- Tune sizing, materials, and sheet-planning settings, then review the BOM and sheet layouts before purchasing material.
- As you build, check off completed cut parts and enter full sheets already on hand.
- Use the top Save project control to keep a portable project file.
In browsers that support the File System Access API, Save project asks for a destination once and then reuses that same file for later saves and autosaves after permission is granted. The button is inactive while the connected file is current and becomes active again after an unsaved change. Save As... is the control for intentionally choosing a different file. Browsers without direct file-write support still keep browser recovery storage current, but saving a JSON file is a normal download/export each time.
D means Drawer. O means Open - the letter O ("oh"), not zero.
D7, D7, D9 three drawers
D9, O15 one drawer, then a 15-inch clear open cubby
D9, Open 15, D7 drawer, open cubby, drawer
D4.75, O12, O12, D4.75
drawer, two separate 12-inch clear cubbies, drawer
A legacy all-number list such as 7, 7, 9.5 remains an all-drawer list. Once D is used, a bare number is treated as an open space, so D9, D9, 15 means two drawers and a 15-unit open cubby.
Adjacent open entries are not combined. They remain separate cubbies with fixed divider panels between them. The drawer-box gap applies between adjacent drawer boxes; fixed dividers separate drawers from open cubbies.
Open-shelf cabinets use the same field for clear opening heights from bottom to top:
9.5, 12, auto
auto may be used for the final/top opening to consume the remaining clear height. Leaving the field blank falls back to evenly spaced shelves using the Shelves count.
Auto-sized drawer-front reveal lines are tied to the physical drawer-box stack. The reveal between adjacent drawers is centered in the actual drawer-box gap. This keeps a shared bottom-up sequence such as D7.5, D7.5 aligned across neighboring cabinets even when one cabinet changes to an open cubby above.
The optional finger-notch feature keeps the cut-list and nesting dimensions rectangular because the notch is a secondary operation on the front blank. Drawer notches open from the top edge. Single-door notches are centered vertically on the pull edge, opposite the per-cabinet hinge-side setting. Rounded notches use cut-out width, entry height, and corner radius. Circular chord/segment notches use circle diameter and segment depth; the chord width is calculated from those two values. A diameter equal to twice the segment depth produces a half-circle; shallower segments produce a flatter crescent-like arc.
The Design tab can download an STL jig for the drawer-face top pull cut-out. The jig opening is enlarged by half the difference between the guide-bushing outside diameter and router-bit diameter, so the bit cuts the configured shape when the bushing follows the opening. The printed jig has 1 1/2 in clamp wings, top locating tabs, and a small center reference ridge. Enter a printed-template thickness thinner than the guide-bushing thickness, import the STL at 100% scale, and verify the result on scrap before routing a finished face. The current STL is for the top-edge drawer-face orientation; the printable 2D templates still include both door hinge orientations.
Drawer boxes default to the existing butt layout: full-depth sides with the front and back between them. Choose 1/4 x 1/4 rabbets, box/finger joints, or half-blind dovetails for the corners. Bottoms can remain between the walls for biscuit fastening, float in grooves, or be captured in rabbets. The cut list reports stock blanks and the selected machining assumptions; verify actual plywood thickness and fit before cutting.
Each cabinet can be:
- Frameless - the original full-overlay behavior
- Face frame - overlay - door/front overlays the face-frame opening by the configured amount
- Face frame - inset - door/front fits inside the face-frame opening with the configured reveal
Global face-frame settings control stile width, rail width, frame thickness, material, overlay, and inset reveal. Face-frame members are treated as solid linear stock, not plywood sheet parts, and are summarized separately in the BOM.
Current limitation: face frames are perimeter frames only: two full-height stiles plus top and bottom rails. Intermediate face-frame rails between individual drawers or cubbies are not generated yet.
CabinetDrafter tracks completed work as individual physical plywood cut parts. The progress UI also groups those parts into practical assemblies, so you can check off a whole carcass, toe-kick/base, drawer, door/front, or shelf set without clicking every piece. Cabinet and assembly rows list their generated material species before you open the physical-parts details. Checking off work does not delete or change the cabinet design; it only removes those parts from the remaining-work nesting and remaining cut-list CSV.
Each cabinet instance has a stable internal ID so progress survives label changes and ordinary editing. Part IDs include the part geometry and material, so a completed part is not silently reused for a newly sized or newly specified part.
The sheet inventory fields are for uncut full usable sheets on hand by material. Scraps and partial sheets are intentionally not treated as full sheets. The shopping list calculates:
additional sheets to buy = max(remaining nested sheets + spare sheets - full sheets on hand, 0)
The remaining plywood layouts are individually selectable before printing, with Select all and Select none controls. The selected sheet set is saved with the project and restored when it is reopened. Layout rectangles use black-and-white hatch fills by species; the sheet header names the material and thickness with explicit units, such as Birch 1/2 inch or Birch 18 mm. Cut-sheet dimensions use practical fractional inches in inch mode and millimeters in metric mode. Printed layouts are scaled labeled cutting diagrams that fit normal printer pages, not 1:1 templates.
The Material / sheet BOM also reconciles purchasing progress by material. It shows full-project parts, completed parts, remaining parts, the full-project sheet target, remaining nested sheets, full sheets on hand, and the sheets still to buy. The purchase number is calculated separately for each material, so sheets on hand for one species do not offset another species.
The Material choices section sets project defaults without pretending the app knows every sheet good in the lumber rack. Choose Birch, Cherry, or a custom name for faces/doors/drawer fronts and visible cabinet parts; do the same independently for the hidden cabinet-box plywood and choose the drawer-box plywood separately. Set each role's actual thickness alongside its material role: visible/front thickness drives doors, drawer fronts, and visible cabinet parts; hidden cabinet-box thickness drives pure drawer carcasses and toe-kick structure; drawer side/bottom thicknesses remain independently configurable. Each cabinet row can override the box/carcass species and face/front species. Mixed-cabinet dividers and open-space backs can either match the visible/front role, match the hidden cabinet-box role, or be set explicitly to birch or cherry. Plywood thickness fields accept decimal inches, woodworking fractions such as 11/16, and explicit metric values such as 18 mm; geometry is stored internally in inches after parsing. Unknown custom woods use the Birch appearance fallback in the offline preview and SketchUp export, while their custom names remain in material planning.
Pure drawer cabinets keep using the hidden cabinet-box material by default. Mixed, open-shelf, and single-door cabinet boxes default to the face/front material because those interiors are visible, but row-level overrides can separate them. Single-door applied backs follow the face/front material so they match the door.
CabinetDrafter creates a valid, non-overlapping, strip-based sheet layout using the selected sheet size, edge trim, kerf, and grain constraints. Choose a crosscut-first or rip-first strategy independently for Birch and Cherry plywood, or leave each on Auto to compare both directions. Dashed guides show full-width cuts that separate strips before the parts within each strip are cut. The sheet count is a practical purchase-planning number for the layout it found, but the nesting algorithm does not claim to find the mathematical minimum number of sheets in every case.
Face-frame solid stock is reported as net cut length grouped by material, thickness, and member width. Add waste based on available board lengths, defects, milling allowance, and your shop process.
Before cutting, verify dimensions against your hardware, actual material thickness, installation site, and chosen construction method.
The Design tab has a Front pulls card with two reusable choices. Each choice can be a cut-out, leather loop, knob, handle, or none. Set separate drawer and door defaults, then override a cabinet or individual drawer under Front pulls in its cabinet row. Drawer numbers run bottom to top. Inherited labels update when defaults change.
Hardware replaces the cut-out on that face and appears in the offline 3D preview, PNG, and SketchUp export. Configure its visual length/diameter, width, projection, and edge distance; drawers use horizontal pulls near the top and doors use vertical pulls opposite the hinges. These are schematic planning dimensions, not drilling patterns or mounting-hole spacing. Hardware is excluded from plywood nesting and the BOM. Existing projects retain their previous cut-out settings. Pull choices and overrides persist in project JSON and browser recovery.
The built-in preview requires no SketchUp and no network connection. It can:
- orbit, zoom, and pan
- switch among isometric/front/left/right/top views
- hide/show fronts, drawer boxes, and backs
- display optional cabinet summary, cabinet width, drawer, and open-space labels
- switch to hidden-line print style for black-and-white shop printouts
- save the current view as PNG
SketchUp is optional. If you have SketchUp Desktop with Ruby support, use Download Ruby script, then in SketchUp Pro open Extensions → Developer → Ruby Console and paste the exact load ... command shown by CabinetDrafter.
By default, the generated Ruby replaces the prior Generated Cabinet Lineup group. Turn off Replace prior Generated Cabinet Lineup in SketchUp before downloading if you want SketchUp to keep existing generated cabinets and add the new export as a separate timestamped group.
The 3D/SketchUp label options include separate toggles for cabinet summary labels, short cabinet width labels, drawer box heights, drawer face heights, and open-space heights.
SketchUp for Web does not execute the Ruby generator; the in-browser 3D preview exists so CabinetDrafter remains useful without SketchUp.
CabinetDrafter has no server component. The core app does not upload cabinet/project data anywhere. Browser storage and project JSON files remain local to the user's machine. GitHub Pages, if used to host the static app, only serves the application files.
See PRIVACY.md.
index.html- complete applicationREADME.html- friendly standalone getting-started guideREADME.md- project documentationdocs/construction.md- current construction assumptions and scopeexamples/mixed-construction-demo.json- example project using frameless and face-frame cabinetsCHANGELOG.md- release historyCONTRIBUTING.md- bug report and pull request guidanceLICENSE- MIT license
Issues and pull requests are welcome. For geometry or material bugs, please include the CabinetDrafter version, project JSON if practical, expected result, actual result, and a screenshot if the problem is visual.
See CONTRIBUTING.md.
MIT License. See LICENSE.
CabinetDrafter is an independent open-source project. SketchUp is a trademark of Trimble Inc. CabinetDrafter is not affiliated with or endorsed by Trimble.
CabinetDrafter is a planning aid, not structural engineering or a substitute for verifying your build. Material dimensions, hardware clearances, installation conditions, and safe construction remain the builder's responsibility. Measure and verify before cutting.
